Determine which .NET Framework versions are installed - .NET Framework (2023)

  • Article
  • 12 minutes to read

Users can install and run multiple versions of .NET Framework on their computers. When you develop or deploy your app, you might need to know which .NET Framework versions are installed on the user's computer. The registry contains a list of the versions of .NET Framework installed on the computer.

Note

This article is specific to .NET Framework. To determine which .NET Core and .NET 5+ SDKs and runtimes are installed, see How to check that .NET is already installed.

.NET Framework consists of two main components, which are versioned separately:

  • A set of assemblies, which are collections of types and resources that provide the functionality for your apps. .NET Framework and the assemblies share the same version number. For example, .NET Framework versions include 4.5, 4.6.1, and 4.7.2.

  • The common language runtime (CLR), which manages and executes your app's code. A single CLR version typically supports multiple .NET Framework versions. For example, CLR version 4.0.30319.xxxxx where xxxxx is less than 42000, supports .NET Framework versions 4 through 4.5.2. CLR version greater than or equal to 4.0.30319.42000 supports .NET Framework versions starting with .NET Framework 4.6.

Community-maintained tools are available to help detect which .NET Framework versions are installed:

For information about detecting the installed updates for each version of .NET Framework, see How to: Determine which .NET Framework updates are installed.

(Video) How to: Determine Which .NET Framework Versions Are Installed

Determine which .NET implementation and version an app is running on

You can use the RuntimeInformation.FrameworkDescription property to query for which .NET implementation and version your app is running on. If the app is running on .NET Framework, the output will be similar to:

.NET Framework 4.8.4250.0

By comparison, if the app is running on .NET Core or .NET 5+, the output will be similar to:

.NET Core 3.1.9.NET 5.0.0

Detect .NET Framework 4.5 and later versions

The version of .NET Framework (4.5 and later) installed on a machine is listed in the registry at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full. If the Full subkey is missing, then .NET Framework 4.5 or above isn't installed.

Note

The NET Framework Setup subkey in the registry path does not begin with a period.

The Release REG_DWORD value in the registry represents the version of .NET Framework installed.

.NET Framework versionValue of Release
.NET Framework 4.5All Windows operating systems: 378389
.NET Framework 4.5.1On Windows 8.1 and Windows Server 2012 R2: 378675
On all other Windows operating systems: 378758
.NET Framework 4.5.2All Windows operating systems: 379893
.NET Framework 4.6On Windows 10: 393295
On all other Windows operating systems: 393297
.NET Framework 4.6.1On Windows 10 November Update systems: 394254
On all other Windows operating systems (including Windows 10): 394271
.NET Framework 4.6.2On Windows 10 Anniversary Update and Windows Server 2016: 394802
On all other Windows operating systems (including other Windows 10 operating systems): 394806
.NET Framework 4.7On Windows 10 Creators Update: 460798
On all other Windows operating systems (including other Windows 10 operating systems): 460805
.NET Framework 4.7.1On Windows 10 Fall Creators Update and Windows Server, version 1709: 461308
On all other Windows operating systems (including other Windows 10 operating systems): 461310
.NET Framework 4.7.2On Windows 10 April 2018 Update and Windows Server, version 1803: 461808
On all Windows operating systems other than Windows 10 April 2018 Update and Windows Server, version 1803: 461814
.NET Framework 4.8On Windows 10 May 2019 Update and Windows 10 November 2019 Update: 528040
On Windows 10 May 2020 Update, October 2020 Update, May 2021 Update, November 2021 Update, and 2022 Update: 528372
On Windows 11 and Windows Server 2022: 528449
On all other Windows operating systems (including other Windows 10 operating systems): 528049
.NET Framework 4.8.1On Windows 11 2022 Update: 533320
All other Windows operating systems: 533325

Minimum version

To determine whether a minimum version of .NET Framework is present, check for a Release REG_DWORD value that's greater than or equal to the corresponding value listed in the following table. For example, if your application runs under .NET Framework 4.8 or a later version, test for a Release REG_DWORD value that's greater than or equal to 528040.

.NET Framework versionMinimum value
.NET Framework 4.5378389
.NET Framework 4.5.1378675
.NET Framework 4.5.2379893
.NET Framework 4.6393295
.NET Framework 4.6.1394254
.NET Framework 4.6.2394802
.NET Framework 4.7460798
.NET Framework 4.7.1461308
.NET Framework 4.7.2461808
.NET Framework 4.8528040
.NET Framework 4.8.1533320

Use Registry Editor

  1. From the Start menu, choose Run, enter regedit, and then select OK.

    (You must have administrative credentials to run regedit.)

  2. In the Registry Editor, open the following subkey: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full. If the Full subkey isn't present, then you don't have .NET Framework 4.5 or later installed.

  3. Check for a REG_DWORD entry named Release. If it exists, then you have .NET Framework 4.5 or later installed. Its value corresponds to a particular version of .NET Framework. In the following figure, for example, the value of the Release entry is 528040, which is the release key for .NET Framework 4.8.

    Determine which .NET Framework versions are installed - .NET Framework (1)

Use PowerShell to check for a minimum version

Use PowerShell commands to check the value of the Release entry of the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full subkey.

The following examples check the value of the Release entry to determine whether .NET Framework 4.6.2 or later is installed. This code returns True if it's installed and False otherwise.

(Video) Check .Net Framework Version Installed in Your PC | Windows 10

(Get-ItemProperty "HKLM:\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full").Release -ge 394802

Query the registry using code

  1. Use the RegistryKey.OpenBaseKey and RegistryKey.OpenSubKey methods to access the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full subkey in the Windows registry.

    Important

    If the app you're running is 32-bit and running in 64-bit Windows, the registry paths will be different than previously listed. The 64-bit registry is available in the HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ subkey. For example, the registry subkey for .NET Framework 4.5 is HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v4\Full.

  2. Check the Release REG_DWORD value to determine the installed version. To be forward-compatible, check for a value greater than or equal to the value listed in the .NET Framework version table.

The following example checks the value of the Release entry in the registry to find the versions of .NET Framework 4.5-4.8 that are installed.

Tip

Add the directive using Microsoft.Win32 or Imports Microsoft.Win32 at the top of your code file if you haven't already done so.

const string subkey = @"SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full\";using (var ndpKey = RegistryKey.OpenBaseKey(RegistryHive.LocalMachine, RegistryView.Registry32).OpenSubKey(subkey)){ if (ndpKey != null && ndpKey.GetValue("Release") != null) { Console.WriteLine($".NET Framework Version: {CheckFor45PlusVersion((int)ndpKey.GetValue("Release"))}"); } else { Console.WriteLine(".NET Framework Version 4.5 or later is not detected."); }}// Checking the version using >= enables forward compatibility.string CheckFor45PlusVersion(int releaseKey){ if (releaseKey >= 528040) return "4.8 or later"; if (releaseKey >= 461808) return "4.7.2"; if (releaseKey >= 461308) return "4.7.1"; if (releaseKey >= 460798) return "4.7"; if (releaseKey >= 394802) return "4.6.2"; if (releaseKey >= 394254) return "4.6.1"; if (releaseKey >= 393295) return "4.6"; if (releaseKey >= 379893) return "4.5.2"; if (releaseKey >= 378675) return "4.5.1"; if (releaseKey >= 378389) return "4.5"; // This code should never execute. A non-null release key should mean // that 4.5 or later is installed. return "No 4.5 or later version detected";}
Private Sub Get45PlusFromRegistry() Const subkey As String = "SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full\" Using ndpKey As RegistryKey = RegistryKey.OpenBaseKey(RegistryHive.LocalMachine, RegistryView.Registry32).OpenSubKey(subkey) If ndpKey IsNot Nothing AndAlso ndpKey.GetValue("Release") IsNot Nothing Then Console.WriteLine($".NET Framework Version: {CheckFor45PlusVersion(ndpKey.GetValue("Release"))}") Else Console.WriteLine(".NET Framework Version 4.5 or later is not detected.") End If End UsingEnd Sub' Checking the version using >= enables forward compatibility.Private Function CheckFor45PlusVersion(releaseKey As Integer) As String If releaseKey >= 528040 Then Return "4.8 or later" ElseIf releaseKey >= 461808 Then Return "4.7.2" ElseIf releaseKey >= 461308 Then Return "4.7.1" ElseIf releaseKey >= 460798 Then Return "4.7" ElseIf releaseKey >= 394802 Then Return "4.6.2" ElseIf releaseKey >= 394254 Then Return "4.6.1" ElseIf releaseKey >= 393295 Then Return "4.6" ElseIf releaseKey >= 379893 Then Return "4.5.2" ElseIf releaseKey >= 378675 Then Return "4.5.1" ElseIf releaseKey >= 378389 Then Return "4.5" End If ' This code should never execute. A non-null release key should mean ' that 4.5 or later is installed. Return "No 4.5 or later version detected"End Function

The example displays output like the following:

.NET Framework Version: 4.6.1

This example follows the recommended practice for version checking:

  • It checks whether the value of the Release entry is greater than or equal to the value of the known release keys.
  • It checks in order from most recent version to earliest version.

Detect .NET Framework 1.0 through 4.0

Each version of .NET Framework from 1.1 to 4.0 is listed as a subkey at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP. The following table lists the path to each .NET Framework version. For most versions, there's an Install REG_DWORD value of 1 to indicate this version is installed. In these subkeys, there's also a Version REG_SZ value that contains a version string.

Note

The NET Framework Setup subkey in the registry path does not begin with a period.

(Video) How to Check .NET Framework Version Installed on Windows 10

Framework VersionRegistry SubkeyValue
1.0HKLM\Software\Microsoft\.NETFramework\Policy\v1.0\3705Install REG_SZ equals 1
1.1HKLM\Software\Microsoft\NET Framework Setup\NDP\v1.1.4322Install REG_DWORD equals 1
2.0HKLM\Software\Microsoft\NET Framework Setup\NDP\v2.0.50727Install REG_DWORD equals 1
3.0HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.0\SetupInstallSuccess REG_DWORD equals 1
3.5HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5Install REG_DWORD equals 1
4.0 Client ProfileHKLM\Software\Microsoft\NET Framework Setup\NDP\v4\ClientInstall REG_DWORD equals 1
4.0 Full ProfileHKLM\Software\Microsoft\NET Framework Setup\NDP\v4\FullInstall REG_DWORD equals 1

Important

If the app you're running is 32-bit and running in 64-bit Windows, the registry paths will be different than previously listed. The 64-bit registry is available in the HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ subkey. For example, the registry subkey for .NET Framework 3.5 is HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v3.5.

Notice that the registry path to the .NET Framework 1.0 subkey is different from the others.

Use Registry Editor (older framework versions)

  1. From the Start menu, choose Run, enter regedit, and then select OK.

    You must have administrative credentials to run regedit.

  2. Open the subkey that matches the version you want to check. Use the table in the Detect .NET Framework 1.0 through 4.0 section.

    The following figure shows the subkey and its Version value for .NET Framework 3.5.

    Determine which .NET Framework versions are installed - .NET Framework (2)

Query the registry using code (older framework versions)

Use the Microsoft.Win32.RegistryKey class to access the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP subkey in the Windows registry.

Important

If the app you're running is 32-bit and running in 64-bit Windows, the registry paths will be different than previously listed. The 64-bit registry is available in the HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ subkey. For example, the registry subkey for .NET Framework 3.5 is HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v3.5.

The following example finds the versions of .NET Framework 1-4 that are installed:

// Open the registry key for the .NET Framework entry.using (RegistryKey ndpKey = RegistryKey.OpenBaseKey(RegistryHive.LocalMachine, RegistryView.Registry32). OpenSubKey(@"SOFTWARE\Microsoft\NET Framework Setup\NDP\")){ foreach (var versionKeyName in ndpKey.GetSubKeyNames()) { // Skip .NET Framework 4.5 version information. if (versionKeyName == "v4") { continue; } if (versionKeyName.StartsWith("v")) { RegistryKey versionKey = ndpKey.OpenSubKey(versionKeyName); // Get the .NET Framework version value. var name = (string)versionKey.GetValue("Version", ""); // Get the service pack (SP) number. var sp = versionKey.GetValue("SP", "").ToString(); // Get the installation flag. var install = versionKey.GetValue("Install", "").ToString(); if (string.IsNullOrEmpty(install)) { // No install info; it must be in a child subkey. Console.WriteLine($"{versionKeyName} {name}"); } else if (install == "1") { // Install = 1 means the version is installed. if (!string.IsNullOrEmpty(sp)) { Console.WriteLine($"{versionKeyName} {name} SP{sp}"); } else { Console.WriteLine($"{versionKeyName} {name}"); } } if (!string.IsNullOrEmpty(name)) { continue; } // else print out info from subkeys... // Iterate through the subkeys of the version subkey. foreach (var subKeyName in versionKey.GetSubKeyNames()) { RegistryKey subKey = versionKey.OpenSubKey(subKeyName); name = (string)subKey.GetValue("Version", ""); if (!string.IsNullOrEmpty(name)) sp = subKey.GetValue("SP", "").ToString(); install = subKey.GetValue("Install", "").ToString(); if (string.IsNullOrEmpty(install)) { // No install info; it must be later. Console.WriteLine($"{versionKeyName} {name}"); } else if (install == "1") { if (!string.IsNullOrEmpty(sp)) { Console.WriteLine($"{subKeyName} {name} SP{sp}"); } else { Console.WriteLine($" {subKeyName} {name}"); } } } } }}
' Opens the registry key for the .NET Framework entry.Using ndpKey As RegistryKey = RegistryKey.OpenBaseKey(RegistryHive.LocalMachine, RegistryView.Registry32). OpenSubKey("SOFTWARE\Microsoft\NET Framework Setup\NDP\") For Each versionKeyName In ndpKey.GetSubKeyNames() ' Skip .NET Framework 4.5 and later. If versionKeyName = "v4" Then Continue For If versionKeyName.StartsWith("v") Then Dim versionKey As RegistryKey = ndpKey.OpenSubKey(versionKeyName) ' Get the .NET Framework version value. Dim name = DirectCast(versionKey.GetValue("Version", ""), String) ' Get the service pack (SP) number. Dim sp = versionKey.GetValue("SP", "").ToString() Dim install = versionKey.GetValue("Install", "").ToString() If String.IsNullOrEmpty(install) Then ' No install info; it must be in a child subkey. Console.WriteLine($"{versionKeyName} {name}") ElseIf install = "1" Then If Not String.IsNullOrEmpty(sp) Then Console.WriteLine($"{versionKeyName} {name} SP{sp}") Else Console.WriteLine($"{versionKeyName} {name}") End If End If If Not String.IsNullOrEmpty(name) Then Continue For End If For Each subKeyName In versionKey.GetSubKeyNames() Dim subKey As RegistryKey = versionKey.OpenSubKey(subKeyName) name = DirectCast(subKey.GetValue("Version", ""), String) If Not String.IsNullOrEmpty(name) Then sp = subKey.GetValue("SP", "").ToString() End If install = subKey.GetValue("Install", "").ToString() If String.IsNullOrEmpty(install) Then ' No install info; it must be later. Console.WriteLine($"{versionKeyName} {name}") ElseIf install = "1" Then If Not String.IsNullOrEmpty(sp) Then Console.WriteLine($"{subKeyName} {name} SP{sp}") Else Console.WriteLine($" {subKeyName} {name}") End If End If Next End If NextEnd Using

The example displays output similar to the following:

(Video) Check .net framework version installed in your pc | Windows 10

v2.0.50727 2.0.50727.4927 SP2v3.0 3.0.30729.4926 SP2v3.5 3.5.30729.4926 SP1v4.0 Client 4.0.0.0

Find CLR versions

The .NET Framework CLR installed with .NET Framework is versioned separately. There are two ways to detect the version of the .NET Framework CLR:

  • The Clrver.exe tool

    Use the CLR Version tool (Clrver.exe) to determine which versions of the CLR are installed on a computer. Open Visual Studio Developer Command Prompt or Visual Studio Developer PowerShell and enter clrver.

    Sample output:

    Versions installed on the machine:v2.0.50727v4.0.30319
  • The Environment class

    Important

    For .NET Framework 4.5 and later versions, don't use the Environment.Version property to detect the version of the CLR. Instead, query the registry as described in Detect .NET Framework 4.5 and later versions.

    1. Query the Environment.Version property to retrieve a Version object.

      The returned System.Version object identifies the version of the runtime that's currently executing the code. It doesn't return assembly versions or other versions of the runtime that may have been installed on the computer.

      For .NET Framework versions 4, 4.5, 4.5.1, and 4.5.2, the string representation of the returned Version object has the form 4.0.30319.xxxxx, where xxxxx is less than 42000. For .NET Framework 4.6 and later versions, it has the form 4.0.30319.42000.

    2. After you have the Version object, query it as follows:

      • For the major release identifier (for example, 4 for version 4.0), use the Version.Major property.

      • For the minor release identifier (for example, 0 for version 4.0), use the Version.Minor property.

      • For the entire version string (for example, 4.0.30319.18010), use the Version.ToString method. This method returns a single value that reflects the version of the runtime that's executing the code. It doesn't return assembly versions or other runtime versions that may be installed on the computer.

        (Video) How to Check .net Version | Check .Net Framework Version Installed | Check .NET Framework Version

    The following example uses the Environment.Version property to retrieve CLR version information:

    Console.WriteLine($"Version: {Environment.Version}");
    Console.WriteLine($"Version: {Environment.Version}")

    The example displays output similar to the following:

    Version: 4.0.30319.18010

See also

  • How to: Determine which .NET Framework updates are installed
  • Troubleshoot: Determine which versions and service packs of .NET Framework are installed
  • Install .NET Framework for developers
  • .NET Framework versions and dependencies

FAQs

What are the different versions of .NET Framework? ›

Jump to:
  • NET Framework 4.8. ...
  • NET Framework 4.8.
  • NET Framework 4.7. ...
  • NET Framework 4.7. ...
  • NET Framework 4.7.
  • NET Framework 4.6. ...
  • NET Framework 4.6. ...
  • NET Framework 4.6.
Aug 30, 2022

How do I know if .NET 3.5 is installed? ›

How to check . NET version using File Explorer
  1. Open File Explorer.
  2. Browse the following path: C:\Windows\Microsoft.NET\Framework.
  3. Enter the folder with the latest version – for example, v4. 0.30319.
  4. Right-click any of the ". ...
  5. Click the Details tab.
  6. Under the "Product version" section, confirm the version of .
May 10, 2021

How do I know if .NET 4.7 is installed? ›

NET Framework 4.7. 2+ should already be installed if you're running Windows 10 Version 1803 or above. To check your Windows 10 Version then go to the Start Menu and type in About and click on About your PC . To check where your version is in relation to Version 1803 then check the following table: Windows 10 versions.

What version of .NET framework is installed on Windows 10? ›

The . NET Framework 4.6. 2 is the latest supported . NET Framework version on Windows 10 1507 and 1511.

How to check .NET framework version using PowerShell command? ›

PowerShell Method
  1. Download the attached script Get-NetFrameworkVersion.ps1.
  2. Right click the script and select Run With PowerShell.
  3. The last output will be the version of Framework 4 installed:
  4. You are now aware of what version of . NET Framework is running on the Windows computer.
Oct 31, 2022

Videos

1. How to Check .net Version
(HOWTECH)
2. How to check which versions of .Net Framework are installed on your computer running Windows 8
(troubleshooterrors)
3. Which version of .NET Framework is Installed in your PC ? || #Steps
(A Life of Pie Channel)
4. How to Find .NET Framework Version Installed in Windows 10
(MDTechVideos)
5. How to Check Installed .NetFramework Versions on Your PC
(TroubleShoot Point)
6. How to Find Your Computer's .NET Framework Version
(OnlineComputerTips)
Top Articles
Latest Posts
Article information

Author: Stevie Stamm

Last Updated: 01/09/2023

Views: 5994

Rating: 5 / 5 (80 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Stevie Stamm

Birthday: 1996-06-22

Address: Apt. 419 4200 Sipes Estate, East Delmerview, WY 05617

Phone: +342332224300

Job: Future Advertising Analyst

Hobby: Leather crafting, Puzzles, Leather crafting, scrapbook, Urban exploration, Cabaret, Skateboarding

Introduction: My name is Stevie Stamm, I am a colorful, sparkling, splendid, vast, open, hilarious, tender person who loves writing and wants to share my knowledge and understanding with you.